USING CRUISE CONTROL
Switching Cruise Control On and
Off
Setting a Speed
Press the SET+ switch or the SET- switch
to store and maintain your current speed.
The cruise control indicator will illuminate.
Changing the Set Speed
Press the SET+ switch to accelerate or the
SET- switch to decelerate.
Cancelling the Set Speed
Press the brake pedal or press the CAN
switch.
Resuming the Set Speed
Press the RES switch to resume the speed
that you previously set.
USING THE SPEED LIMITER
Press button A to switch the system on and
off.
Setting the speed limit
Use the cruise control switches to alter the
maximum speed setting.
Press the SET+ switch or the SET- switch
to select your desired speed limit.
Press button B to cancel the limiter and
place it in standby mode.
Press the RES button to resume the limiter.
DRIVER ALERT
The system automatically monitors your
driving behaviour using various inputs
including the front camera sensor.
If the system detects that you are becoming
drowsy or there is a deterioration in your
driving, the system will alert you.
USING DRIVER ALERT
Switching the system on and off
Activate the system using the information
display.
System display
When active the system will run
automatically in the background and only
issue warnings if required. You can view the
status at any time using the information
display.
The alertness level is shown by six steps as
a coloured bar.
14
To Next Page
Loading...
