EasyManua.ls Logo

Ford GALAXY - Setting the Temperature; Mono Mode

Ford GALAXY
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: Avoid adjusting the settings when
the vehicle interior is extremely hot or cold.
The system adjusts to the current
circumstances automatically. For the
system to function properly, the side and
center air vents should be fully open.
Note: At low outside air temperatures,
when the system is in auto mode, the air
stream will be directed to the windshield
and the side windows as long as the engine
is cold.
Note: For information on the automatic
climate control, on vehicles fitted with a
combined Navigation and automatic
climate control system, see separate
handbook.
Setting the temperature
You can set the temperature between 16ºC
(61ºF) and 28ºC (82ºF) in steps of 0.5ºC
(1ºF). In position LO (below 16ºC [61ºF])
the system will switch to permanent
cooling, in position HI (above 28ºC [82ºF])
to permanent heating, and will not regulate
a stable temperature.
Mono mode
In mono mode, the temperature settings
for both the drivers and passengers side
are linked. If you adjust the temperature
using the rotary control on the drivers side,
the same temperature will be set for the
passengers side. MONO is shown in the
display.
To switch mono mode off
Select a temperature for the passengers
side using the rotary control on the
passengers side. Mono mode will switch
off and MONO disappears from the
display. The temperature for the drivers
side will remain unchanged. You can now
adjust the driver's and passenger's side
temperatures independently of each other.
The temperatures are shown in the display.
You can set a difference of up to 4ºC
(8ºF).
Note: If you set a difference of greater than
4°C (8ºF), the temperature on the other
side will be adjusted so that the difference
remains at 4°C (8ºF).
Note: If you set one of the sides to HI or LO,
both sides will be set to HI or LO.
To switch mono mode back on
Press the MONO button. MONO is shown
in the display, and the passengers side
temperature will be adjusted to the drivers
side temperature.
Blower
High speed
Low speed
Use the buttons to adjust the blower
speed.
The blower setting is shown in the display.
117
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Climate Control

Table of Contents

Other manuals for Ford GALAXY

Related product manuals