1. Insert a small flat-bladed tool into the
slot.
2. Turn the tool through 90 degrees.
3. Push downwards on the tool to detach
the gaiter frame from the trim panel.
4. Push downwards on the gaiter frame
to release the lever and move the
selector lever from the park position.
5. Pull upwards on the gaiter until the
gaiter frame engages in the trim panel.
Note: If position P is selected again, this
procedure must be repeated.
165
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Transmission
To Next Page
Loading...
