42
To unlock the boot
Press the button twice within 3
seconds.
Reprogramming the unlocking
function
You can change the unlocking
function so that pressing the
button once unlocks only the
driver’s door. Pressing the
button again within 3 seconds also
unlocks the passenger’s doors.
In order to re-programme the
function, press and hold the
and buttons simultaneously for
atleast 4 seconds with the ignition
switched OFF. The direction
indicators will flash twice to
indicate that the unlocking function
has been successfully
reprogrammed.
Pressing and holding both buttons
again simultaneously for at least 4
seconds will change the function
back.
Locking the vehicle
To activate central locking:
With the Key: Turn the key in the
driver’s door to position .
With the remote control: Press the
button once.
Programming additional radio
frequency remote controls
A Maximum of four radio
frequency remote controls can be
programed (including the ones
delivered with the vehicle).
2
Locks (Security)
To Next Page
Loading...
