Ford Ka 2008 - If an Exterior Light Burns out

117
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
On some versions, it is necessary to
remove the headlamp completely to
replace the front light cluster bulbs.
To set the required unit proceed as
follows:
❒ fully steer the wheels outwards to
expose the flap G-fig. 13, open the
flap and unscrew the fastening device;
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating,
see “When needing to change a bulb”.
FRONT LIGHT CLUSTERS
The front light clusters contain sidelight,
dipped beam, main beam and direction
indicator bulbs.
The bulbs are arranged inside the light
unit as follows fig. 11:
A sidelights
B dipped beams/main beams
(double light)
C direction indicators
Working from the engine compartmnet,
remove rubber cap D-fig. 12 to gain
access to the sidelight bulbs; remove
rubber cap E-fig. 12 to gain access to
the main/dipped beam lightlights; turn
bulb holder F-fig. 12 anticlockwise to
gain access to the direction light bulbs.
fig. 12
F
E
D
KA00086m
fig. 11
C
B
A
KA00085m
❒ after raising the bonnet, unscrew
bolts H and I located at the points
shown in fig. 14;
❒ remove the headlight.
fig. 13
G
KA00117m
fig. 14
H
I
KA00118m
101-130 Ford KA GB 15-07-2008 8:50 Pagina 117