Ford Ka 2008 - If an Interior Light Burns out

120
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating,
see “When needing to change a bulb”.
INSIDE CEILING LIGHT
To change the bulb, proceed as follows:
❒ using the screwdriver provided,
extract the ceiling light A-fig. 25
working in the point indicated by the
arrow;
NUMBER PLATE LIGHTS fig. 24
To replace the bulbs proceed as
follows:
❒ work in the point shown by the
arrow and remove lens A;
❒ change the bulb releasing it from the
side contacts and making sure the
new bulb is correctly fastened
between the contacts;
❒ reinstall the lens.
fig. 23
B
C
KA00092m
THIRD BRAKE LIGHT fig. 22-23
To change the bulb proceed as follows:
❒ tighten the 4 fastening bolts A:
❒ withdraw the assembly;
❒ disconnect the electric connector B;
❒ tighten the bulb holder after
unscrewing the two fastening bolts:
❒ remove the press-fitted bulb to be
replaced and replace it;
❒ tighten the bulb holder and retighten
both bolts:
❒ tighten both fastening bolts A.
fig. 22
A A
KA00091m
fig. 24
A A
KA00093m
101-130 Ford KA GB 15-07-2008 8:50 Pagina 120