VEHICLE IDENTIFICATION
PLATE fig. 2
It is fitted to the right front door pillar
and contains the following information:
A National or vehicle homologation
B VIN plate
C1 Vehicle gross weight.
C2 Gross weight with trailer.
C3 Maximum permitted weight for the
front axle.
C4 Maximum permitted weight for the
rear axle.
M Emission figures (diesel only).
D Bodywork type or model codes.
L Exhaust emission level codes.
K Body paintwork colour codes.
J Interior trim codes.
H Ratio at the gearbox axle codes
G Gearbox codes
F Engine codes
E Driver’s side
IDENTIFICATION DATA
We recommend taking note of the
identification codes. The following
identification codes are printed and
shown on the plates fig. 1:
1 Inflation pressure.
2 Car marking.
3 Chassis marking (VIN).
4 Model plate (VIN).
fig. 1
To Next Page
Loading...
