37
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
YOUR CAR
MAIN BEAMS fig. 32
With knurled ring in position
2
, push
the stalk forward toward the dashboard
(steady position). The warning light
1
on the instrument panel comes on at the
same time. They switch off pulling the
stalk toward the wheel (low beams turn
on).
FLASHING fig. 32
You can flash the beams pulling the stalk
toward the wheel (unstable position).
The warning light
1
on the
instrument panel will come on at the
same time.
DIRECTION INDICATORS fig. 33
Push the stalk to (stable) position:
up (position a): right-hand indicator
ON;
down (position b): left-hand indicator
ON.
Warning light ¥ or Î will blink on the
instrument panel. Indicators are
switched off automatically when the
steering wheel is straightened.
Lane change function
If you want to signal that you are
changing lane, bring the left stalk in
unstable position for shorter than half a
second. The direction indicator on the
selected side flashes three times and
then switches off automatically.
EXTERNAL LIGHTS
The left-hand stalk operates most of the
external lights. The external lights can
only be switched on when the ignition
key is on MAR. The instrument panel
and the various controls on the
dashboard will come on when the
external lights are switched on.
Lights off fig. 32
Knurled ring turned to symbol O.
SIDE LIGHTS fig. 32
Turn the knurled ring to position
6
.
The warning light
3
on the
instrument panel will come on.
DIPPED BEAMS fig. 32
Turn the knurled ring to position
2
.
The warning light
3
on the
instrument panel will come on at the
same time.
fig. 32
KA00108m
fig. 33
KA00109m
To Next Page
Loading...
