74
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
YOUR CAR
SAFETY
Fit the child seat when the
car is stationary. The child
seat is correctly anchored to the
brackets when you hear the click.
Follow the instructions for
assembly, disassembly and
positioning that the manufacturer
must supply with the child seat.
WARNING
fig. 10
KA00054m
IUF: suitable for Isofix child restraint systems to be set facing forwards, universal
class (fitted with third upper fastener), approved for the relevant weight group.
IL: suitable for special child restraint systems, specific Isofix type, and type-approved
for this type of car. The seat can be installed by moving the front seat forward.
X: Isofix position not suited for Isofix child restraint systems in this weight group
and/or in this size class.
PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON
UNIVERSAL ISOFIX CHILD’S SEAT USE
The table below shows the different installation possibilities of Isofix restraint
systems on seats fitted with Universal Isofix fasteners in compliance with European
standard ECE 16.
Weight group Orientation Class Isofix position
child seat Isofix size rear side
Group 0 - 0 to 10 kg
Group 0+ up to 13 kg
Group I from 9
up to 18 kg
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing backwards
Facing forwards
Facing forwards
Facing forwards
E
E
D
C
D
C
B
B1
A
X
X
X
X
X
X
IUF
IUF
X
To Next Page
Loading...
