3. Remove the bulb holder from the lamp
assembly by turning it
counterclockwise.
4. Disconnect the electrical connector.
5. Remove the bulb from the bulb holder
by pulling it straight out.
Side Repeater
1. Carefully remove the side repeater.
2. Remove the bulb holder.
3. Remove the bulb.
Approach Lamp
Note: Position the mirror glass as far inward
as possible.
1. Insert a screwdriver into the gap
between the mirror housing and the
mirror glass and release the metal
retaining clip.
199
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
Maintenance
To Next Page
Loading...
