Speed control
• Standard analog instrument
cluster
The “CRUISE” light comes on when
the ON control is pressed.
The “SET” light comes on when either the COAST/SET or RES/ACCEL
controls are pressed. The “SET” light turns off when the cruise cancel
control is pressed or the brake is applied. Both the “CRUISE” and “SET”
lights turn off when the OFF control is pressed or the ignition is turned
to the OFF position.
• Optional electronic instrument
cluster
This light comes on when either the
COAST/SET or RES/ACCEL controls are pressed. It turns off when the
cruise cancel control is pressed, the brake is applied or the ignition is
turned to the OFF position.
O/D off
Illuminates when the overdrive
function has been turned OFF using
the Transmission Control Switch
(TCS) at the end of gearshift. If the
light does not come on or the light flashes steadily, have your vehicle
serviced as soon as possible, damage to the transmission could occur.
Door ajar
• Standard analog instrument
cluster
• Optional electronic instrument
cluster
Illuminates when any door is open (or not fully closed).
CRUISE SET
CRUISE
O/D
OFF
Instrument Cluster
14
To Next Page
Loading...
Need help?
General
