Ford Mustang 2002 - Disconnect Main Vacuum Supply; Disconnect TPS Electrical Connector; Remove Throttle Body Bolts; Remove Throttle Body and Adapter Assembly

20. Disconnect the main vacuum supply from the base of the throttle body adapter.
21. Disconnect the throttle position sensor (TPS) electrical connector.
22. Remove the bolts.
23. Remove the throttle body and adapter as an assembly.
 Inspect and clean the sealing surfaces.
 The gasket is reusable if not damaged.
24. Disconnect the fuel pressure sensor electrical connector and the vacuum hose.
Page
4
of
14
2002 Mustang Workshop Manual
7/15/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2B/~MUS~LEN/19/S
...