To charge the high voltage battery:
You must unwrap the mobile charger
completely before charging.
1. Put the vehicle in park (P).
Note: Your vehicle must be in park (P) to
charge and for the charge status indicator
to illuminate.
2. Press the center right edge of the
charge port door and then release to
open the door.
3. Plug the connector into the control box.
Note: To insert the connector, firmly grasp
the connector by the cable or plug and push
into the control box until an audible click is
heard. Make sure the connector is fully
inserted and flush with the control box
before inserting it into the outlet. Improper
insertion will cause a longer charge session
or faults.
4. Plug the connector into the wall outlet.
5. Confirm that the mobile charger's
indicators illuminate.
6. Plug the charge coupler into the charge
port receptacle on your vehicle.
Note: Make sure the button clicks
confirming that you have completely
engaged the coupler. When you plug in your
vehicle, it starts charging to 100% by default
unless scheduled charging has been set up
for this location. See Setting the Charging
Schedule and Preferences (page 174).
Note: Plug the connector into the wall
outlet before connecting the charge coupler
to your vehicle's charge port.
Note: When the handle is properly engaged
the light ring illuminates. This indicates the
beginning of a normal charge cycle.
Note: There could be a delay in light ring
illumination due to vehicle internal
communications.
Note: If charging for your vehicle fails,
please contact the Customer Relationship
Center, or click on Live chat. To ensure
superior service, please take note of your
serial number when contacting customer
support.
For more information, visit
www.owner.ford.com .
Charging At a Charge Station
1. Put your vehicle in park (P).
Note: Your vehicle must be in park (P) to
charge.
170
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Charging Your Vehicle
To Next Page
Loading...
