Ford MUSTANG MACH-E 2022 - DC Charging

Note: You cannot shift your vehicle out of
park (P) until you remove the charge
coupler.
E317333
3. Press the center right-hand edge of the
charge port door to close.
DC CHARGING
CONNECTING THE CHARGER
E306676
To charge the high voltage battery:
1. Put the vehicle in park (P).
Note: Your vehicle must be in park (P) to
charge and for the charge status indicator
to illuminate.
2. Press the center right-hand edge of the
charge port door and then release to
open the door.
3. Open the dust cap cover on the charge
port to expose lower connectors.
E335267
4. Plug the charge coupler into the charge
port receptacle on your vehicle.
E335188
Note: Make sure the button clicks
confirming that you have completely
engaged the coupler. Your vehicle locks to
the charge coupler.
Note: When the handle is properly engaged,
the light ring illuminates. This indicates the
beginning of a normal charge cycle.
Note: The vehicle monitors battery health
and may take actions including, but not
limited to, reducing the DC fast charge rate
to protect the battery hardware from
damage, and to maintain battery health.
172
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Charging Your Vehicle