Activate and deactivate the
system using the lane keeping
system button on the steering
wheel.
During lane changes, the design of the
blind spot assist feature detects vehicles
in, or approaching, your blind spot and
provides a warning, plus steering
assistance to direct your vehicle back into
your lane.
When active, this system functions with or
without the use of direction indicators and
hazard flashers.
You must keep your hands on the steering
wheel at all times.
BLIND SPOT ASSIST LIMITATIONS
All system limitations present in the basic
lane keeping system also apply to blind
spot assist.
Blind spot assist does not function under
the following conditions:
• The system does not detect lane
markings.
• One or both rear radar sensors become
blocked or faulty.
• You attach a trailer with a wiring
connection to your vehicle.
Note: Blind spot assist may have reduced
performance if you attach a trailer to your
vehicle without a wiring connection.
Blind spot assist may have difficulty
detecting hazards under the following
conditions:
• If a vehicle is approaching in an
adjacent lane at a relative speed much
higher than your vehicle.
• Bad weather conditions are present
that obstruct the sensors.
• You attach a bicycle rack to your
vehicle.
BLIND SPOT ASSIST INDICATORS
To Next Page
Loading...
