Ford MUSTANG MACH-E 2022 - Setting the Speed Sign Recognition Speed Warning; Setting the Speed Sign Recognition Speed Tolerance; Speed Sign Recognition - Troubleshooting

SETTING THE SPEED SIGN
RECOGNITION SPEED
WARNING
To set the speed warning, use the
touchscreen.
1. Access the vehicle drawer.
2. Press SETTINGS.
3. Press Driver Assistance.
4. Press Speed Limit Assist.
5. Select to switch the feature on or off.
SETTING THE SPEED SIGN
RECOGNITION SPEED
TOLERANCE
To set the tolerance of the speed warning,
use the touchscreen.
1. Access the vehicle drawer.
2. Press SETTINGS.
3. Press Driver Assistance.
4. Press Speed Limit Assist.
5. Press Tolerance.
6. Use the slider bar to select the required
level.
SPEED SIGN RECOGNITION – TROUBLESHOOTING
SPEED SIGN RECOGNITION – INFORMATION MESSAGES
ActionMessage
The traffic sign data provided by the navig-
ation system is unavailable due to weak or
no signal. Wait for a short period of time for
the signal to improve. If the message
continues to appear, have the system
checked as soon as possible.
Traffic Sign Reduced Performance See
Manual
269
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Speed Sign Recognition