Ford MUSTANG MACH-E 2023 - Page 16

SETTING THE LIFTGATE
OPENING HEIGHT
1. Open the ligate.
2. When it reaches
the desired height,
stop the ligate’s
movement by
pressing the
control button on
the ligate.
NOTE: Once the ligate
has stopped moving, you
can manually move it to
the desired height.
3. Press and hold the ligate control button
on the ligate until you hear a tone,
indicating programming is complete.
4. The power ligate now opens at
the programmed height. To change the
programmed height, repeat the
above procedure.
HEATED MIRRORS
When you switch the heated rear window on,
the heated exterior mirrors turn on
.
FRUNK
To open the frunk using the touchscreen:
1. Press the
button on the touchscreen.
2. From the controls menu, press
the frunk icon
.
To open the frunk using the handle, pull
the release lever located on the driver side
footwell twice.
OPENING THE
POWER LIFTGATE*
FROM INSIDE YOUR
VEHICLE
With the transmission in
park (P), access
the ligate settings on
the touchscreen.
• Press the
button on
the touchscreen.
• From the controls menu,
press the ligate icon
.
CONVENIENCE
/ CONVENIENCE
STARTING AND STOPPING
THE ELECTRIC MOTOR
To start your electric motor in the vehicle,
a valid remote control must be inside
your vehicle to switch the power on and
start your vehicle.
1. Be sure the vehicle is in park (P).
2. Press the brake pedal.
3. Press the Start Stop button.
NOTE: You will not hear any motor noise.
4. The
READY
light illuminates.
14