TECHNOLOGY
PRE-COLLISION ASSIST
If your vehicle is rapidly approaching another
stationary vehicle, a vehicle traveling in the
same direction as yours, or a pedestrian or
cyclist within your driving path, the system
provides alerts or aids in preventing a
collision. The system uses a camera and
radar to detect if a collision is about to occur.
Automatic emergency braking may activate
if the system determines that a collision is
imminent. The system may help the driver
reduce impact damage or to avoid the crash
completely. The system is active at speeds
above 3 mph (5 km/h) and pedestrian and
cyclist detection is active at speeds up to
50 mph (80 km/h).
Refer to the Pre-Collision Assist chapter in
your Owner's Manual for more information.
ACTIVE PARK ASSIST*
Active park assist uses sensors to detect
parking spaces and provides assistance
parking into and pulling out of parking
spaces. The system controls steering,
acceleration, braking and shiing as required
to maneuver into or out of a parking space
when activated. Press the
active park
assist button, then press the active park
assist icon on the touchscreen to bring up full
screen notifications. Press the so keys on
the touchscreen to switch between parallel
park in, perpendicular park in or parallel park
out parking modes.
To cancel parking assistance at any time,
shi out of neutral (N). To pause parking
assistance at
any time, release
the active park
assist button.
Refer to the
Active Park
Assist chapter
in your Owner's
Manual for
more information.
19
To Next Page
Loading...
