Ford Ranger 1998 - Page 10

11. Connect the rear heated oxygen (HO2S) sensors (9F472).
12. Connect the oil pressure sender (9278).
13. Connect the fuel injectors (9F593).
14. Connect the camshaft position (CMP) sensor (6B288).
15. Connect the 42-pin connector to the bracket.
16. Connect all harness locators.
17. Connect the LH spark plug wire locators and spark plugs (12405).
16
1998 Ranger Workshop Manual
11/21/2009
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWL/~MUS~LEN/21
...