Black plate (16,1)
Removal/Installation
To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, press the
uprights into the holes while pressing the
stop-catch.
WARNING
Always drive with the head restraints
set up when seats are being used and
make sure they are properly set up:
Driving with the head restraints not
set up is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.
2-6
Essential Safety Equipment
Seats
RANGER_F8M1-10-08I_Edition1 Page16
Friday, September 26 2008 3:6 PM
Form No.F8M1-10-08I
To Next Page
Loading...
