Ford Ranger 2012 - 1.13 Load; Load Distribution-Specifications; Load Distribution Calculations - Driver and Passenger Weight Distribution

1.13 Load Distribution—Specifications
1.13.1 Load Distribution Calculations - Driver and Passenger Weight Distribution
CAUTIONS:
Do not exceed the axle plated weights.
Do not exceed the gross vehicle weight.
Tire manufacturer specification must be
maintained.
NOTE: Uneven load distribution could result in
unacceptable handling and braking
characteristics.
NOTE: Over loading of the vehicle could result in
unacceptable ground clearance.
NOTE: The centre of mass of the body equipment
and the payload it contains should be located
within the dimensions given.
NOTE: Avoid one-sided load distribution.
NOTE: For further information please contact
your local National Sales Company representative,
or Local Ford Dealer.
Single Cab
1
A
B
E133921
Date of Publication: 12/2014
FORD RANGER 2012
1 General Information
23