3.1 Fuel System
WARNINGS:
Make sure that the modified vehicle
complies with all relevant legal
requirements.
Do not remove or relocate the fuel cooler
when modifying vehicle.
CAUTIONS:
Ensure modifications to vehicle do not
obstruct airflow to fuel cooler.
Make sure that sufficient clearance is
maintained for all driving conditions to
all hot and moving components.
Make sure that there are no sharp edges,
including fasteners, pointing towards any
fuel system component.
The fuel filler pipe must be supported in
accordance with the guidelines in this
section.
3.1.1 Fuel Filler Pipe Shipping Bracket
CAUTION: The fuel filler pipe mounting
bracket on cab chassis vehicles is
designed for shipping of the vehicle only.
The fuel filler pipe mounting bracket fitted to cab
chassis vehicles is designed to be removed once
the body or tray is fitted to the vehicle. The body
or tray must include a fuel filler mounting that
complies with the guidelines in this section. The
shipping bracket can be left installed on the vehicle
if desired, but only if an additional fuel filler pipe
mounting bracket is used in accordance with the
guidelines in this section.
Fuel Filler Pipe Shipping Bracket - Single Cab
To Next Page
Loading...
