Ford Ranger 2012 - Auxiliary Battery Relocation and Use of Electrical Harness Extension (Fly Lead) (Vehicles with Special Equipment Pack)

Auxiliary Battery Cable
E201190
1
DescriptionItem
Auxiliary Battery Cable1
4.1.3 Auxiliary Battery Relocation and
use of Electrical Harness Extension
(Fly Lead) (Vehicles with Special
Equipment Pack)
An Electrical Harness Extension (fly lead) may be
required when the auxiliary battery is being
relocated from the temporary battery carrier. The
fly lead is required to connect the auxiliary battery
wiring harness to the 16-pin connector on the
vehicle wiring harness. This allows the operation
of auxiliary battery powered accessories from the
dash mounted switch panel within the vehicle
cabin.
The electrical harness extension is available in
two lengths:
• Single Cab Chassis: 1850 mm
• Double Cab Chassis: 1390 mm
When used on a vehicle fitted with an aluminium
load tray, the electrical harness extension is fitted
in the shown orientation:
Date of Publication: 12/2014
FORD RANGER 2012
4 Electrical
45