• Apply the parking brake.
• Open any door.
• Drive off uphill without re-applying the
brake.
• Wait for one to two seconds after you
remove your foot from the brake pedal.
• If the system is active in a forward gear,
select reverse gear.
• If the system is active in neutral,
release the clutch pedal (Manual
transmission).
• If the system is active in reverse gear,
select neutral.
Switching the System On and Off
Note: You can only switch the system on
and off if your vehicle has a manual
transmission.
Note: The system will remain on or off
depending on how it was last set.
Your vehicle comes with this feature
already enabled. If required, you can switch
this feature off using the information
display. See General Information (page
58).
104
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Brakes
To Next Page
Loading...
