2-wheel drive vehicles
Press and hold the switch for one second
to deactivate engine traction control, trailer
stability control and brake traction control.
Hill start assist remains active.
4-wheel drive vehicles
Note: All the stability control (ESP)
functions are reactivated when 2H position
is selected.
Transfer shift switch in 4H position:
• Press and hold the switch for one
second to deactivate engine traction
control and trailer stability control. Hill
descent control, hill start assist and
brake traction control remain active.
Transfer shift switch in 4H or 4L position:
• Press and hold the switch for five
seconds to deactivate engine traction
control, trailer stability control and
brake traction control. Hill descent
control and hill start assist remain
active.
Transfer shift switch in 2H position:
• Press and hold the switch for one
second to deactivate engine traction
control, brake traction control and
stability control including trailer
stability control. Hill descent control
and hill start assist remain active.
107
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Stability Control
To Next Page
Loading...
