Switching the Rear View Camera
On
WARNING
The camera may not detect objects
that are very close to your vehicle.
Switch the ignition and the audio unit on.
Move the transmission selector lever to
reverse.
The image is displayed on the rear view
mirror screen.
The camera may not operate correctly in
the following conditions:
• Dark areas.
• Intense light.
• If the ambient temperature increases
or decreases rapidly.
• If the camera is wet, for example in rain
or high humidity.
• If the camera's view is obstructed, for
example by mud.
Using the Display
WARNING
Objects above the camera may not
be visible. Check the area behind
your vehicle when necessary.
Note: Marks are for general guidance only,
and are calculated for vehicles in maximum
load conditions on an even road surface.
The lines show the distance from the outer
edge of the front tire plus two inches (51
millimeters) and the rear bumper.
113
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Parking Aids
To Next Page
Loading...
