Connecting Your Digital Media
Player to SYNC™ via the AUX Port
Note: At any time, you may press the
VOICE BUTTON and say "HELP" for
assistance.
With the radio and digital media player ON,
plug the device into the AUX port.
Press the VOICE BUTTON and when
prompted, say "LINE IN".
Press the AUX button in the menu options
until LINE IN source is displayed.
Connecting Your Digital Media
Player to SYNC™ via Bluetooth®
SYNC allows users to stream music from
their Bluetooth-enabled cell phone or
player and play it through the SYNC audio
system in the vehicle.
Pair your phone with SYNC.
Press the VOICE BUTTON and when
prompted, say "BLUETOOTH AUDIO".
PLAY music by saying "PLAY" and SYNC
will prompt "PLAY ALL", then start music
playing.
You also can press the VOICE BUTTON
and say one of the following appropriate
voice commands, when the music is
playing.
"BLUETOOTH AUDIO"
"PAUSE""PLAY"
"PLAY PREVIOUS TRACK" / "PREVIOUS
TRACK"
"PLAY NEXT TRACK" / "NEXT TRACK"
"CANCEL""HELP"
SYNC™ TROUBLESHOOTING
Your SYNC system is easy to use. However,
should questions arise, please refer to the
tables below.
Use the website at any time to check your
phone's compatibility. Visit
www.fordsync.com for more information.
233
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
SYNC™ (If Equipped)
To Next Page
Loading...
