Adjustment
You can adjust the front fog lamp aiming
slightly for driving comfort.
Note: Fog lamp adjustment must meet the
local regulation requirements.
1. Position the unloaded vehicle on a flat,
level surface.
2. Seat one person in the driver’s seat.
3. Start the engine so that the battery
remains charged.
4. Turn the front fog lamp on.
5. Adjust the fog lamp aiming such that
the cut off line is not more than X: 20
m (65.6 ft).
43
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Lighting
To Next Page
Loading...
