Ford Ranger 2012 - Page 79

Unfolding the Seat Cushion
Double Cab
WARNING
Make sure that the seats and the
seat backrests are secure and fully
locked in their catches.
E247640
1. Push the seat cushion down.
2. Remove the seatbelt buckles from
behind the elastic strap on the seat
backrest.
Note: You must stow the cushion tether
strap in the pocket provided.
Folding the Seat Backrest
Double Cab
WARNING
When folding the seat backrest
down, take care not to get your
fingers caught in the mechanism.
Note: When folding the cushion up, make
sure that the seatbelt buckles are visible to
an occupant and are not under the seat.
Note: Do not use the rear surface of the rear
seat backrest as a load floor.
Note: Do not unlatch and fold the seat
backrest when the seat cushion is folded
up.
1
2
E131744
1. Pull the release strap up.
2. Push the seat backrest forward.
Unfolding the Seat Backrest
Double cab
WARNING
Make sure that the seats and the
seat backrests are secure and fully
locked in their catches.
Note: When folding the seat backrest up,
make sure that the seatbelts are visible to
an occupant and not caught behind the
seat.
77
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Seats