Ford Ranger 2012 - Technical Specifications

6. Install the fuel cap by rotating it
clockwise until it clicks.
7. Close and push the fuel filler flap to
lock it.
Note: If you must replace the fuel filler cap,
replace only with the cap designed for your
vehicle. The customer warranty may be void
for any damage to the fuel tank or fuel
system if the correct genuine Ford fuel filler
cap is not used.
TECHNICAL SPECIFICATIONS
Fuel Consumption Figures
CO2 Emis-
sions
CombinedExtra-UrbanUrban
Variant
g/km
l/100 km
(mpg)
l/100 km
(mpg)
l/100 km
(mpg)
24410.2 (27.7)8.2 (34.4)13.6 (20.7)
Vehicles with a 2.5L
Duratec-HE engine - 2-
wheel drive
25910.8 (26.1)8.9 (31.7)14.1 (20.0)
Vehicles with a 2.5L
Duratec-HE engine - 4-
wheel drive
2037.6 (37.2)6.8 (41.5)9.0 (31.4)
Vehicles with a 2.2L
Duratorq-TDCi engine - 2-
wheel drive (manual trans-
mission - MT82)
2178.1 (34.9)7.1 (39.8)9.9 (28.5)
Vehicles with a 2.2L
Duratorq-TDCi engine - 4-
wheel drive (manual trans-
mission - MT82)
2388.9 (31.7)7.6 (37.2)11.1 (25.4)
Vehicles with a 2.2L
Duratorq-TDCi engine - 2-
wheel drive (automatic
transmission)
2519.4 (30.0)7.9 (35.7)12.1 (23.3)
Vehicles with a 2.2L
Duratorq-TDCi engine - 4-
wheel drive (automatic
transmission)
2228.4 (33.6)7.0 (40.3)10.8 (26.1)
Vehicles with a 3.2L
Duratorq-TDCi engine - 2-
wheel drive (manual trans-
mission - MT82)
90
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Fuel and Refueling