Ford Ranger 2012 - Transmission; Manual Transmission; Automatic Transmission

MANUAL TRANSMISSION
Selecting Reverse Gear
Do not engage reverse gear when your
vehicle is moving. This can cause damage
to the transmission.
E184729
Raise the collar when you select reverse
gear.
AUTOMATIC TRANSMISSION
WARNINGS
Always apply the parking brake fully
and make sure you shift into park (P).
Switch the ignition off and remove
the key whenever you leave your vehicle.
Do not apply the brake pedal and
accelerator pedal simultaneously.
Applying both pedals simultaneously
for more than a few seconds will limit
engine performance, which may result in
difficulty maintaining speed in traffic and
could lead to serious injury.
Note: A cold engine has a higher idle speed.
This will increase the tendency for your
vehicle to creep when you have selected a
drive gear.
Selector lever positions
P
R
N
D
S
-
+
1
2
E132720
ParkP
ReverseR
NeutralN
DriveD
Sport mode and manual shiftingS
Manual shift downS-
Manual shift upS+
Press the button on the selector lever to
select reverse (R) or park (P). The current
gear is shown in the display screen.
Park (P)
WARNING
Move the transmission selector lever
to park (P) only when your vehicle is
stationary.
92
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Transmission