Ford Ranger 2015 - Auxiliary Lighting Loads (Vehicles Without Special Equipment Pack) (Low Level Vehicles Only)

16-Pin Connector - Detail
FunctionColor cableConnector Pin
Blank (not used)-1
Brake / stop +12v (lamp Bar)YE-GN2
LED beacon lamp +12vWH3
Position / tail lamps +12V (lamp Bar)VT-WH4
Reverse lamps +12v (lamp Bar)GN-BU5
Turn right +12v (lamp Bar)GY-OG6
Turn left +12v (lamp Bar)GY-OG7
Blank (not used)-8
Spare +12vYE-GY9
Load box lamps +12vYE-BU10
Blank (not used)-11
Blank (not used)-12
Blank (not used)-13
Blank (not used)-14
Blank (not used)-15
GroundBK-YE16
4.3.9 Auxiliary Lighting Loads
(Vehicles without Special Equipment
Pack) (Low Level Vehicles Only)
NOTE: Connections for auxiliary lighting loads
must be low and stable current draw.
Trailer Tow Module (if equipped)
Connections for auxiliary lighting loads can be
made via the trailer tow module (TTM) located
under the passenger seat. See Trailer Towing in
this section.
Date of Publication: 02/2017
FORD RANGER 2015