4.3.12 Centre High Mount Stop Lamp
(CHMSL) - Canopy Fitment -Low
Level Vehicles
WARNING: The maximum current load
that can be applied to the CHMSL circuit
is 1.72A for incandescent globes, and
0.38A for LED lamps. Do not exceed the
rated load.
NOTE: Disable the original vehicle mounted
CHMSL if the canopy CHMSL is intended to be
the primary CHMSL.
NOTE: The CHMSL circuit is pulse width
modulated (PWM).
NOTE: Check the operation of the CHMSL prior
to customer handover.
When installing a canopy equipped with a CHMSL,
a feed for the CHMSL can be taken from the BCM
(Connector 4, Pin 2).
DescriptionItem
BCM CHMSL Feed (Connector 4, Pin 2).1
Date of Publication: 02/2017
FORD RANGER 2015
To Next Page
Loading...
