Ford Ranger 2015 - Page 93

NOTE: Usage of clamps for the canopy fitment
are only allowed on the centre and rear portion
of the load box.
NOTE: Use both points from group A and a
minimum of one point from group B as front
structural attachment points.
Load Box Structural Attachment Points
DescriptionItem
Front structural attachment points1
Centre structural attachment points2
Rear structural attachment points3
Top surface of load box sides
*
4
Return flange of load box sides
*
5
*
Do not cut, drill, or use these surfaces to bolt the
canopy.
Date of Publication: 02/2017
FORD RANGER 2015