Ford RANGER 2016 - Page 306

SpecificationRecommended fluidPart
WSH-M1C231-BPOLYALKYLENE GLYCOLAir conditioning Compressor
lubricant
WSS-M99C130-ADiesel Exhaust Fluid
(AdBlue
®
)
Diesel Exhaust Fluid
(AdBlue
®
)
*
For markets with low sulphur content (less than 350 ppm)
**
For markets with high sulphur content (more than 350 ppm)
***
For markets with low sulphur content (less than 50 ppm) AND Stage 5 emissions
Your engine has been designed to be used
with Ford Engine Oil, which gives a fuel
economy benefit whilst maintaining the
durability of your engine.
Topping up the oil:
Engine oil - Diesel (for markets with
low sulphur content less than 350
ppm): If you are unable to find an oil that
meets the specification, you must use SAE
5W-30 that meets the specification
defined by ACEA A5/B5.
Engine oil - Diesel (for markets with
high sulphur content greater than 350
ppm): If you are unable to find an oil that
meets the specification defined in the
vehicle fluids table, you must use SAE
10W-30 that meets the specification
defined by API CH-4.
Using topping up oils other than the one
specified can result in longer engine
cranking periods, reduced engine
performance, reduced fuel economy and
increased emission levels.
Capacities
CapacityItemVariant
6.7 L (1 gal)Engine oil with filter2.5L Duratec
6.4 L (1 gal)Engine oil without filter2.5L Duratec
8.55 L (1.88 gal)Engine oil with filter2.2L Duratorq-TDCi
8.15 L (1.79 gal)Engine oil without filter2.2L Duratorq-TDCi
9.75 L (2 gal)Engine oil with filter3.2L Duratorq-TDCi
9.35 L (2.06 gal)Engine oil without filter3.2L Duratorq-TDCi
Between the MIN line
and the MAX line
Clutch fluidManual transmission
2.7 L (0.6 gal)Manual transmission oilManual transmission
10.5 L (2.3 gal)Automatic transmission oilAutomatic transmission (dry)
9 L (2.0 gal)Automatic transmission oilAutomatic transmission (wet)
303
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Capacities and Specifications