2. Place the jack on the foam block and
pull the top of the jack up, to align the
jack load rest hole with the hole of the
floor bracket.
3. Insert the wing bolt and tighten the
wing bolt by hand.
Stowing the Tool Kit - SuperCrew
1. Place the tools inside the tool bag.
2. Install the tool bag on the plastic bin
by passing them through the D-ring
straps and placing them as shown in
the image.
3. Pull the straps forward to tighten.
TECHNICAL SPECIFICATIONS
300
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, First-Printing
Wheels and Tires
To Next Page
Loading...
