Ford Ranger 2020 - Lamps Hazard; Direction Indication; Electrically Operated Door Mirrors; Center High Mount Stop Lamp (CHMSL) - Canopy Fitment

Trailer Tow Module Connections
Voltage (V)Current (A)FeatureComponent
Terminal
Number
MaxMinMaxMin
Connector A
-630.5Left Direction Indicator1
-630.5Right Direction Indicator2
-670.5Position Lamp3
----Not used4
-640.5Reverse Lamp5
16910-Battery Charge Out - where used6
-640.5Stop Lamp7
-620.5Fog Lamp8
----Not used9
----Not used10
----Not used11
----Not used12
Connector B
----B(+) Fuse 87 (40A) BJB1
----B(+) Fuse 73 (30A) BJB2
Connector C
-61-Ground1
-60.1-CAN L2
-60.1-CAN H3
----Not used4
4.5.7 Lamps – Hazard / Direction
Indication
The maximum permissible load with the standard
system is:
• 3 x 5W – front and rear indicators + side
repeaters (Left Hand Side)
• 3 x 5W – front and rear indicators + side
repeaters (Right Hand Side)
4.5.8 Electrically Operated Door
Mirrors
WARNING: Do not tamper with the base
system (controlled by Central Junction
Box and multiplex architecture) and any
feeds taken from the associated wiring
or controller.
NOTE: These options are not suitable for
aftermarket or vehicle converters.
4.5.9 center High Mount Stop Lamp
(CHMSL) - Canopy Fitment
WARNINGS:
The maximum current load that can be
applied to the CHMSL circuit is 1.72A for
incandescent globes, and 0.38A for LED
lamps. Do not exceed the rated load.
Make sure all wiring is insulated and
routed securely.
NOTE: The fitment of a canopy to high level
vehicles equipped with a combined CHMSL / Cargo
Lamp requires that the cargo lamp feature be
disabled.
NOTE: Disable the original vehicle mounted
CHMSL if the canopy CHMSL is intended to be the
primary CHMSL.
NOTE: The CHMSL circuit may be Pulse Width
Modulated (PWM).
NOTE: Check the operation of the CHMSL prior to
customer handover.
FORD RANGER 2020
Date of Publication: 09/2020
4 Electrical
68