Ford Ranger 2020 - Chassis Cab Modifications

Wheel Guard Envelope
r
B
H
K
L
A
C D
E E
X
1
X
X-X
F
G
r
r
r
r
E134132
Wheel Guard Dimensions
265/65R17255/
70R16
255/
70R16
215/
70R16
Dimension265/
65R18
265/
65R17
255/
70R16
215/
70R16
Dimension
190mmG
*
455mmA
922mm922mm915mm914mmH425mmB
588mmK305mmC
30mmL275mmD
20mmr110°E
Center line of Vehicle1420mmF
Section through Center of Wheel GuardX
*
Dimension G is to the bottom of the swage
5.1.3 Chassis Cab
WARNING: Excessive heat can build up
from the exhaust system, in particular
from the catalytic converter. Ensure
adequate heat shields are maintained.
CAUTION: Uneven load distribution could
result in unacceptable handling and
braking characteristics.
When carrying out vehicle conversions /
modifications the following points should be
considered:
• Make sure that all of the reinforced holes
provided in the chassis frame top surface are
used for full length bodies or sub-frames, see
figures shown.
• Make sure that the vehicle structural integrity
is maintained.
• Do not drill into closed frame body members.
• Make sure that the design for the body
alterations or additional structure disperse the
load evenly.
FORD RANGER 2020
Date of Publication: 09/2020
5 Body and Paint
72