5.1.3 Integrated Bodies and
Conversions - Raptor
WARNING: All wheelhouse coverage must
comply with local regulatory vehicle
standards.
For integral structures such as ambulances or
motor-homes with increased rear overhang built
onto the chassis the following applies:
• Reduced departure angles, e.g. rear entry step,
should be discussed with the end user /
customer. Consider removable components to
avoid damage on ferries or low-loaders.
• Unique spare wheel stowage may be required
if obscured by rear step, check for accessibility.
• The recommended minimum tyre clearance to
mudguard dimensions on conversions are
outlined in the following figure and table:
Wheelhouse Envelope - Raptor
B
H
K
A
C D
E
E
X
1
X
X-X
F
G
r
r
r
r
E370591
r
J
Z
Y
L
G
r
r
r
J
CAUTIONS:
Wheelhouse dimensions are provided as
a guide only.
Wheelhouse envelopes are intended to
represent an "open" wheelhouse only.
Changes to wheel and tyre sizes may
impact the ride and handling of the
vehicle, certain Ford Driver Assist
Technology functions and other vehicle
attributes. Any change must be in
adherence to local regulatory standards.
See your National Sales Agent for
clarification.
NOTE: All dimensions are in millimetres.
NOTE: Measurements are taken with vehicle at
kerb weight on flat ground.
NOTE: Dimensions Y and Z are only applicable
when Dimension J is at value.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:02 BST 2022
5 Body and Paint
112
To Next Page
Loading...
