1.5 Jacking
WARNINGS:
Ensure jack screwthread is adequately
lubricated before use.
The jack should be used on level firm
ground wherever possible.
Switch the ignition off and apply park
brake fully before lifting vehicle.
It is recommended that the wheels of the
vehicle be chocked, and that no person
should remain in a vehicle that is being
jacked.
No person should place any portion of
their body under a vehicle that is
supported by a jack.
WARNING: Do not get under a vehicle that
is supported by a jack.
E1
72
WARNING: The jack supplied with this
vehicle is only intended for changing
wheels. Do not use the vehicle jack other
than when you are changing a wheel in an
emergency.
CAUTION: Make sure that access to the
spare wheel is maintained when
converting the vehicle or relocating the
spare wheel. If vehicle service body or
mounted assembly affect the area
surrounding the spare wheel, make sure
sufficient clearance is left for successful
lowering and raising of the spare wheel.
Failure to adhere to this requirement may
cause damage to the winching
mechanism and insecure location of the
spare wheel.
NOTE: When using the vehicle jack, refer to the
owner guide for correct operating instructions.
The spare wheel winch is located above the spare
wheel and can be accessed from the rear of the
chassis frame.
The jack must be assembled and fixed
appropriately to the body to ensure safety,
durability and accessibility.
Vehicle Jacking Points and Axle Stand Positions
E363499
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:01 BST 2022
1 General Information
12
To Next Page
Loading...
