Load Box Reinforcement Bracket Location
E390543
1
DescriptionItem
Load Box Reinforcement Brackets1
These brackets have been developed by Ford to
brace the floor to the wall of the load box to ensure
durability performance of the load box is
maintained with the installation of a Ford Licenced
Accessory canopy.
Ford also makes these load box reinforcement
brackets available as a Ford Licensed Accessories
that can be purchased from any authorised Ford
Dealer:
• Ranger (Excl. Raptor) Part Number:
AMN1WJ27726AA / VN1WZ2627726A
• Ranger Raptor Part Number: AMN1WJ27726BA
/ VN1WZ2627726B
CAUTION: These reinforcement brackets
have been designed specifically for Ford
Licensed Accessory Canopies and their
suitability for use with any aftermarket
(non Ford Licensed Accessory) canopy
will need to be determined by the
aftermarket canopy manufacturer or
supplier.
Responsibility for the appropriate use of these
brackets in a vehicle which is modified by a body
builder or with an alternate accessory
manufacturer’s products, remains with that party.
It is the vehicle modifier’s responsibility to ensure
that the modification is carried out in such a way
as to ensure that durability of the load box is
maintained.
Contact your National Sales Agent or your local
Ford Dealer for information on the supply and
installation of the reinforcement brackets.
Canopy, Ladder Rack Canoe Rack
CAUTION: When a canopy, ladder rack,
canoe rack or similar load box mounted
accessory is fitted, a combination of the
indicated mounting points on top of the
load box must be used for suitable fixture
to the vehicle. Load bearing and heavy
vehicle accessories must use cross plane
attachment points to ensure secure
fitment.
Load bearing and heavy vehicle accessories must
use cross plane attachment points to ensure
secure fitment.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:02 BST 2022
5 Body and Paint
130
To Next Page
Loading...
