-Item
30mm below bottom of
D-ring
A
15mm right of webbingB
30mm above retractor
hole (right hand side)
C
30mm above retractor
hole (left hand side)
D
25mm left of webbingE
280mm above retractor
hole (left hand side)
F
35mm left of webbingG
NOTE: Right hand side shown, left hand side
mirrored.
Double Cab - First Row Seat Belt
WARNINGS:
Do not drill in right hand/left hand side
retractor assembly area.
Drilling is only permitted in the red area
indicated.
Retractor damage: If drilling holes near
or above the retractor and anchor
pretensioner, the mechanisms must be
covered to prevent metal shavings/debris
from falling into the assembly and
causing functional issues.
Webbing damage: Any outfitted hardware
must not cut, pinch or interfere with the
seatbelt webbing along its entire path
(from retractor to D-ring area). Avoid
sharp brackets near webbing; all edges
must have a minimum radius of 0.5mm.
Avoid upfitting parts that may change the
belt routing to the occupant.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:02 BST 2022
5 Body and Paint
148
To Next Page
Loading...
