Ford Ranger 2022 - Registration Plates

Vehicle frontal area measurements
mmMeasurement
≤ 1820A
1860B
1839C
1945D
2214E
Vehicle frontal area configuration
Af mAf mVehicle
frontal area
configuration
-2.8731 = Base
vehicle with
style side box
0.3023.1752 = Box @ Cab
Width and
Roof Height
0.5003.3733 = Box @
0.5m2 > Base
1.0003.8734 = Box @ 1m2
> Base
The Vehicle Converter only needs to calculate the
frontal area of the mounted unit (AxB) in m.
1.9.14 Registration Plates
Front Registration Plate
WARNINGS:
The mounting of a registration plate to
the front of the vehicle must comply with
local regulations.
No part of a vehicle registration plate
may be obscured by standard equipment,
regular production options or equipment,
in line with local regulations.
The registration plate must be affixed to the front
of the motor vehicle forward of and parallel to the
front ‘Axle’ so that no part of such registration
plate is more than 1,300 mm from the ground.
Rear Registration Plate
WARNINGS:
The mounting of a registration plate to
the front of the vehicle must comply with
local regulations.
No part of a vehicle registration plate
may be obscured by standard equipment,
regular production options or equipment,
in line with local regulations.
The registration plate must be affixed to the rear
of the motor vehicle so that no part of such
registration plate is more than 1,300 mm from the
ground.
Date of Publication: 06/2022
FORD RANGER 2022
Composed on:Thu Oct 13 04:01:01 BST 2022
1 General Information
29