Dimensions - not to exceed for Chassis Cab body Length
Dimension (mm)Description
Double Cab - Raptor
1498mm
Frame length behind back of cab (not including rear
light cross-member)
A
Under run bar and towing attachment legislation to be maintainedB
2400 over the top of frame, provided load
distribution requirements are met
Maximum recommended external body height *C
497mmFront outside of body to rear axle centre lineD
(50% of vehicle wheelbase), provided
load distribution requirements are met
Maximum recommended rear overhangE
28mm MinimumClearance between the back of the cab and the bodyF
Ensure local lighting legislation is maintained. Refer to: 4.6 Exterior Lighting (page 85).G
30mmClearance between the top of the cab and the bodyH
1910Maximum external body width (without side step)J
*
For WLTP markets this dimensions should be disregarded. Refer to the relevant WLTP dimensions.
Refer to: 1.9 Package and Ergonomics (page 19).
All dimensions (shown in mm) are subject to manufacturing tolerances and refer to min specification
models which do not include additional equipment. The illustrations are for guidance only.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:01 BST 2022
1 General Information
34