Ford Ranger 2022 - Vehicle Cabin Clearance; Kerb Mass and Payload; Gross Vehicle Mass and Axle Load Ratings; Front, Rear and Side Under-Run Protection

1.10.5 Vehicle Cabin Clearance
NOTE: Single Cab shown, Super Cab, Double Cab
and Raptor similar.
Ford recommend minimum gap of 28mm between
the vehicle cabin sheet-metal and any canopy,
service body or equipment fitted to the vehicle.
E388178
28 mm
1.10.6 Kerb Mass and Payload
WARNING: Check local legislation for
legal requirements.
Details of vehicle kerb mass and payload
capacities can be provided by your local National
Sales Company representative.
1.10.7 Gross Vehicle Mass and Axle
Load Ratings
WARNING: Check local legislation for
legal requirements.
Details of gross vehicle axle load ratings can be
provided by your local National Sales Company
representative.
1.10.8 Front, Rear and Side Under-Run
Protection
WARNING: Check local legislation for
legal requirements.
Front Under-Run Protection, Rear Under-Run
Protection and Side Under-Run Protection must
meet the requirements of local design rules.
1.10.9 Rear Under-Run Protection - Cab
Chassis Vehicles
WARNING: Check local legislation for
legal requirements.
Rear Under-Run Protection must be designed to
directive ECE 58 or applicable local legislation
where local market regulations require.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:01 BST 2022
1 General Information
38