EasyManua.ls Logo

Ford Ranger 2022 - Fuel Filler Vent Hose - (Diesel)

Ford Ranger 2022
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fuel Filler Overview - 3.0L EcoBoost V6
E378896
2
1
3
4
5
2
1
3
4
DescriptionItem
Rear Axle Breather Pipe1
Fuel Tank Recirculation Line2
Fuel Tank Filler Pipe (Capless)3
Evaporative Emissions Canister Fresh Air Pipe4
Evaporative Emissions Canister5
CAUTION: Maintain canister fresh air hose
mounting location exactly per factory
installed fresh air hose position.
3.2.4 Fuel Filler Vent Hose - (Diesel)
The fuel tank vent hose routing at end will need
to have shepherd hook with opening at or above
height as described in this document in order
to maintain water wading specifications and
prevent water ingress into the fuel system.
A length of fuel grade flexible hose should be
clipped to the vehicle body, with the open end
at least 600 mm (4x2) or 800 mm (4x4 or 4x2
hi-rider) above ground height. It is
recommended to measure this height when the
vehicle is fully loaded.
The fuel tank vent hose should be protected
and positioned away from direct water spray,
wheel splash and mud splash, and water
drainage holes that may be present.
The fuel tank vent hose must be upright with
shepherd hook at end as shown in view. Keep
shepherd hook back of filler pipe as shown in
view.
A length of fuel grade flexible hose should be
clipped to the vehicle body, with the shepherd
hook opening at least 600 mm ( 4x2) or 800
mm ( 4x4 or 4x2 hi-rider)above ground height.
It is recommended to measure this height when
the vehicle is fully loaded.
Fuel Filler Vent Breather Shepherds Hook
E376757
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:01 BST 2022
3 Powertrain
62

Table of Contents

Related product manuals