4.5 Information and Entertainment System
4.5.1 Rear View Camera
Aftermarket Rear View Camera -
Connecting straight to SYNC
NOTE: The display screen does not have a direct
input for connection to devices such as cameras.
Only vehicles with SYNC radios have the capability
to support aftermarket fitment of the rear view
camera.
There are three pins on the SYNC module.
• C1-14: Input Camera - Parking Aid Rear Video
(+)
• C1-15: Input Camera - Parking Aid Rear Video
(-)
• C1-33: Ground: Camera-Parking Aid Rear Video
The cable between the rear view camera and
SYNC module needs to be screened twisted pair,
preferably of a single run to minimize signal loss.
In addition to this, the vehicle will have certain
parameters reconfigured. This needs to be carried
out at an authorized Ford dealership to not
invalidate warranty.
The display will only provide rear view camera
information when reverse gear is engaged.
Rear Brake Assist
NOTE: Do not paint or modify the rear camera or
rear bumper as this will impede the Rear Brake
Assist functionality.
NOTE: No change to power steering system is
supported by Reverse Brake Assist.
NOTE: No modification to the traction control
system or ABS system is supported by Reverse
Brake Assist.
NOTE: Modification to door latching system or
removal of doors may interfere with Reverse Brake
Assist.
NOTE: Fitting of accessories to the rear of the
vehicle will impede the functionality of Reverse
Brake Assist, in these instances the feature should
not be used - False Reverse Brake Assist events
may occur.
NOTE: Do not obstruct the rear camera.
All Cameras
NOTE: Do not move or modify any camera
mounting positions or brackets, as this will impede
on camera and Rear Brake Assist functionality.
NOTE: Do not disconnect or remove any cameras
fitted to the vehicle.
NOTE: Do not interfere with the full field of view
cone of the rear camera.
NOTE: Any object mounted within the field of view
cones of the front and side-mirror cameras will
obstruct the 360-camera visibility.
NOTE: Any change to track width will result in the
dynamic guidelines not being representative of
vehicle turning circle.
360° Camera
NOTE: Any change to track width will result in the
dynamic guidelines not being representative of
vehicle turning circle.
NOTE: Attachment of towing extensions to side
mirrors may impede on 360 camera visibility.
NOTE: Do not interfere with the full field of view
cones of the 360° camera.
NOTE: Any object mounted within the field of view
cones of the front and side-mirror cameras will
obstruct the 360-camera visibility.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:02 BST 2022
4 Electrical
82
To Next Page
Loading...
