Ford Ranger 2022 - Brake (Stop) Lamps); Position (Park) Lamps)

Headlamp Fuse
Lighting Fuses
Headlamp LH/RH20AF100
Connection of Auxiliary Loads - Vehicles with Level 3 - High Level Headlamps
E376929
B
A
DescriptionItem
Low beam = Connector C1 Pin 1A
High beam = Connector C1 Pin 13B
Headlamp Fuse
Lighting Fuses
Headlamp LH/RH20AF100
4.6.6 Brake (Stop) Lamps)
Provision for additional Brake (Stop) Lamps is
available via a blunt cut wire located near to the
Centre High Mount Stop Lamp (CHMSL). The
blunt cut wire can support a current load of 1.75
Amps steady state (at 13.5 Volts).
4.6.7 Position (Park) Lamps)
Additional Position (Park) lamps can be
connected via jumper harness or a pre-installed
and tagged blunt cut wire located in the LHS cowl
area, as part of the vehicles existing position lamp
circuit wiring. The existing position lamp circuit
wiring can support a current load of 3.1 Amps
steady state at (at 13.5 Volts).
Date of Publication: 06/2022
FORD RANGER 2022
Composed on:Thu Oct 13 04:01:02 BST 2022
4 Electrical
93