Ford Ranger 2022 - Lamps - Hazard; Direction Indication

Trailer Tow Module Connections
Voltage (V)Current (A)FeatureComponent
Terminal
Number
MaxMinMaxMin
Connector A
-630.5Left Direction Indicator1
-630.5Right Direction Indicator2
-670.5Position Lamp3
----Not used4
-640.5Reverse Lamp5
16910-Battery Charge Out - where used6
-640.5Stop Lamp7
-620.5Fog Lamp8
----Not used9
----Not used10
----Not used11
----Not used12
Connector B
----B(+) Fuse 87 (40A) BJB1
----B(+) Fuse 73 (30A) BJB2
Connector C
-61-
Ground1
-60.1-CAN L2
-60.1-CAN H3
----Not used4
For vehicles fitted without a tow bar as standard,
a genuine Ford accessory trailer tow electrical kit
has been developed to enable a tow bar to be
installed. The kit comprises of the trailer towing
control module, trailer plug, wiring and associated
hardware components. Once the kit is installed,
the vehicle must then be configured using a Ford
FDRS diagnostic tool. This configuration can be
performed by your Ford authorised dealer.
4.6.10 Lamps – Hazard / Direction
Indication
The maximum permissible load with the standard
system is:
• 3 x 5W – front and rear indicators + side
repeaters (Left Hand Side)
• 3 x 5W – front and rear indicators + side
repeaters (Right Hand Side)
NOTE: The maximum output of the turn/hazard
signal BCM outputs is 3.2 amps.
Turn/Hazard lamp signals are available as an
output frm the BCM.
FORD RANGER 2022
Date of Publication: 06/2022
Composed on:Thu Oct 13 04:01:02 BST 2022
4 Electrical
96