Ford RANGER 2024 - Selecting a Four-Wheel Drive Mode - Advanced 4 X4 with 4 A Mode; Four-Wheel Drive Modes

Note: If Shift Delayed Drive Forward
displays in the instrument cluster display,
place the transmission in a forward gear,
move your vehicle forward approximately
5 ft (1.5 m), and shift the transmission back
to neutral (N) to allow the transfer case to
complete the range shift.
SELECTING A FOUR-WHEEL
DRIVE MODE - ADVANCED 4X4
WITH 4A MODE
E359616
Push the button to select the four-wheel
drive mode.
• 2H - Two-wheel drive high.
• 4A - Four-wheel drive auto. See
Four-Wheel Drive Auto (page 205).
• 4H - Four-wheel drive high. See
Four-Wheel Drive High (page 205).
• 4L - Four-wheel drive low. See
Four-Wheel Drive Low (page 205).
Note: Do not perform this operation if the
rear wheels are slipping or while applying
the accelerator pedal.
Note: When the light is solid, the system
has achieved the desired four-wheel drive
mode. When a selected four-wheel drive
mode LED is blinking, the system is
attempting to shift to that specific mode.
Note: When all lights are blinking have your
vehicle serviced as soon as possible.
Shifting to or from Four-Wheel
Drive Low
1. Bring your vehicle to a speed of 0 mph
(0 km/h).
2. For vehicles with an automatic
transmission, place in neutral (N). For
vehicles with a manual transmission,
fully press the clutch pedal.
3. Push the four-wheel drive mode
selector to the four-wheel drive mode
you prefer.
Note: A 4x4 Shift in Progress message
appears in the instrument cluster display
indicating the shift is in progress. If any of
the previous shift conditions are not met,
the shift will not occur and the instrument
cluster display guides you through the
proper shifting procedures.
Note: If Shift Delayed Drive Forward
displays in the instrument cluster display,
place the transmission in a forward gear,
move your vehicle forward approximately
5 ft (1.5 m), and shift the transmission back
to neutral (N) to allow the transfer case to
complete the range shift.
FOUR-WHEEL DRIVE MODES
TWO-WHEEL DRIVE HIGH
Two-wheel drive high is for general
on-road driving. Power is sent to the rear
wheels only.
Note: Two-wheel drive high can turn on or
off based on Drive Mode selection See Drive
Mode Control (page 278).
204
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Four-Wheel Drive